Vessels that a machine builds layer by layer from a clay paste, after a digital model. The visible layer lines, the open lattice and the complex curves give the style its look.
Core thesis
When a machine builds the form from a file, the vessel can have a shape that no wheel or mould can make, and the layer line becomes the ornament.
Design principles
Draw the form as a digital model with a parametric rule: a twist, a wave, a lattice or a gradient.
Print the clay paste in layers of 0.8 to 2 mm with a nozzle of 1 to 4 mm.
Keep the layer lines as the surface texture; do not sand them away.
Vary the wall in one piece: a solid base, a thin wall and an open lattice at the top.
Print porcelain or stoneware paste that holds its shape, and dry it slowly for 3 to 7 days.
Fire the piece in one cycle at 1220 to 1300 °C, with a support of kiln setters where it overhangs.
Use a thin satin or clear glaze that keeps the ridges, or leave the surface bare.
Print a colour pattern with a ceramic inkjet if the piece needs a graphic surface.